Rikom 521 C Series
With the constantly rising of user bandwidth, operators also put forward higher demands for the port bandwidth and performance of aggregator.
Raisecom RI521 series are next-generation carrier-class pre-aggregation and aggregation products that provide high performance, high reliability and high densities 1GE, 10GE, 25GE, 40GE and 100GE port types in a compact standard 1U enclosure, flexibly adapting to diversified operator’s network bandwidth requirements. They support rich Layer 2 and Layer 3 features, with advanced QoS features, customers’ services at different levels can be flexibly and finely scheduled, and support various VPN services over MPLS-TP, IP/MPLS, SR-MPLS and SRv6 networks, to implement services isolation through network virtualization, greatly improved network capacity and utilization, and help customers build a powerful next-generation packet transport network.
- Ethernet Service
- MAC addresses
- Jumbo frame up to 12288 Bytes
- 4,094 VLANs, IEEE802.1Q, IEEE802.1P, IEEE802.1ad QinQ
- Layer 2 control protocol (L2CP) handling
- Super VLANs
- Private VLAN (PVLAN) with primary, community, and isolated type
- IP Service
- IPv4/v6 static routing
- RIPv1/v2/ng, OSPFv2/v3, ISISv4/v6 and BGP4/4+
- SRv6 BE, SRv6 TE
- PMTU IPv4/v6
- VRF Lite IPv4/v6
- DHCPv4/v6 server, client, relay, snooping
- MPLS Service
- MPLS L2VPN: VPWS, VPLS, H-VPLS, MS-PW
- MPLS L3VPN
- Ethernet VPN
- 6PE/6vPE
- BGP-LU
- Inter-AS MPLS L2VPN Option A, C
- Inter-AS MPLS L3VPN Option A, C
- Static CR-LSP, LDP, RSVP-TE, SR-MPLS, tunnel policy
- Multicast
- IGMP v1, v2, v3
- IGMP Snooping, MVR, VLAN copy, Proxy
- MLD v1, v2*
- MLD Snooping*
- PIM-SM and PIM-SSM IPv4/v6*
- NG-MVPN
- mLDP In-Band MVPN*
- QoS
- Flexible Traffic classification base on MAC, IP, Port, VLAN, CoS, DSCP, etc.
- Traffic policing
- Hierarchical CAR
- 8 local priority, 8 queues per port
- WRED
- Traffic shaping per queue/port
- SP, DRR, WRR, SP+DRR, SP+WRR queue scheduling
- 3-level H-QoS
- Reliability
- IEEE802.1ax Link aggregation group, manual, LACP
- Muti-chassis LAG
- Switchport backup
- STP, RSTP, MSTP, MRSTP
- ITU-T 8032 ERPS based on port or CFM, switchover time less than 50ms
- Loop detection
- Ethernet fault propagation, MPLS PW fault propagation
- ULDP
- IPv4/v6 ECMP
- Flow Aware Labels
- Static/dynamic IPv4/v6 FRR, TE FRR, LDP FRR, VPNv4/v6 FRR, TI-LFA FRR
- VRRPv2/v3
- MPLS TE hot-standby
- Flex-E
- 100GE ethernet mode & Flex-E mode
- Slicing to 1/2/3/…/N x 5Gbps
- Supporting Ethernet service, IP service and MPLS service
- OAM/SLA
- IEEE 802.3ah EFM-OAM
- IEEE 1ag/ITU-T Y.1731 CFM
- ITU-T 1731 performance monitoring (LM, DM) for Ethernet and MPLS L2VPN
- TWAMP-Lite for Ethernet, IP, MPLS L3VPN, 6PE/6VPE*
- SAT: RFC2544, 1564
- Layer 2 loopback with MAC swap
- MPLS ping and traceroute
- VCCV ping and traceroute
- Layer 2 or 3 Dying Gasp in case of power failure
- Security
- CPU CAR
- CPU anti-attack for Land, Ping of death, ICMP unreachable/redirecting/forward, Tear drop, Fraggle, WinNuke, TCP malformed
- DHCPv4/v6 Snooping
- ARP filter, DAI
- IPSGv4/v6
- DOT1X
- ACL based on VLAN, CoS, MAC, EtherType, IP or user-define
- RADIUS, TACACS+
- Storm control (broadcast, multicast, DLF)
- Port-security MAC
- URPF
- TCP and UDP Small Servers disabled by default
- Maintenance and Management
- Zero-Touch Provisioning
- SNMP v1/v2/v3
- Netconf, Telemetry
- CLI management by local CONSOLE, Telnet and SSHv2
- KeepAlive, RMON, LLDP, Syslog
- SFP digital diagnostic management (DDM)
- CPU, memory monitoring
- Voltage and temperature monitoring
- Telnet client, Telnet server
- Synchronization
- NTP, SNTP
- IEEE 1588v2 TC
- Sync E
* Features that will be available in future release
Model | RI521-2C-24 | RI521-4C-24 | RI521-6C-48 |
Switching capacity | 880Gbps / 800Gbps | 2Tbps / 4.8Tbps | 2.88Tbps / 4.8Tbps |
NOTE: device’s switching capability / chip’s switching capability | |||
Management interface | 1 x CONSOLE (USB TYPE-A) 1 x NEG management port (RJ-45) | ||
Service Interface | 2 x 100G/40G QSFP28/QSFP+ 24 x 10G/1G/100M SFP+/SFP | 4 x 100G/40G QSFP28/QSFP+ 24 x 25G/10G/1G SFP28/SFP+/SFP | 6 x 100G/40G QSFP28/QSFP+ 24 x 25G/10G/1G SFP28/SFP+/SFP 24 x 10G/1G SFP+/SFP |
Power Supplies | 2 hot-swappable AC/DC power supplies provide 1+1 redundancy AC:220V, 100~240VAC DC: -48V, -36~-72V | ||
Power consumption | ≤ 73W | ≤ 300W | ≤ 339W |
Operating Temperature (Below altitude 1800m) | -5~55˚C* | -10~55˚C* | |
Humidity | 10~90% non-condensing | ||
Dimension (mm) | 1RU: 440(W) x 360(D) x 44(H) | 1RU: 442(W) x 360(D) x 44(H) | |
Weight | 4.47kg | 8.095kg | 8.625kg |
SRv6 | SRv6 BE | SRv6 BE, SRv6 TE | |
Flex-E | 〇 | ● | |
H-QoS | 2-level | 3-level | |
* The maximum operating temperature is reduced to 45℃when using 100G 80KM Optical module, and 50℃when using 100G 40KM Optical module | |||
Compliances | |||
Standards & Protocols | |||
|
RI521-2C-24
Standard 1U, 19” standalone IP/MPLS pre-aggregation device, 2 x 100G/40G QSFP28/QSFP+ for uplink, 24 x 10G/1G/100M SFP+/SFP for downlink, CONSOLE and
- SNMP ports for management
- AC/D: dual hot-swappable AC power supply
- AC/S: single hot-swappable AC power supply and single FANS310 module
- DC/D: dual hot-swappable DC power supply
- DC/S: single hot-swappable DC power supply and single FANS310 module
- AC_DC: one hot-swappable AC power supply and one hot-swappable DC power supply
RI521-4C-24
Standard 1U, 19” standalone IP/MPLS pre-aggregation device, 4 x 100G/40G QSFP28/QSFP+ for uplink, 24 x 25G/10G/1G SFP28/SFP+/SFP for downlink, 2FANs, CONSOLE and SNMP ports for management
- AC/D: dual hot-swappable AC power supply
- AC/S: single hot-swappable AC power supply
- DC/D: dual hot-swappable DC power supply
- DC/S: single hot-swappable DC power supply
- AC_DC: one hot-swappable AC power supply and one hot-swappable DC power supply
RI521-6C-48
Standard 1U, 19” standalone IP/MPLS pre-aggregation device, 6 x 100G/40G
QSFP28/QSFP+ for uplink, 24 x 25G/10G/1G SFP28/SFP+/SFP and 24 x 10G/1G SFP+/SFP for downlink, 2FANs, CONSOLE and SNMP ports for management
- AC/S: single hot-swappable AC power supply -AC/D: dual hot-swappable AC power supply
- DC/D: dual hot-swappable DC power supply
- DC/S: single hot-swappable DC power supply
- AC_DC: one hot-swappable AC power supply and one hot-swappable DC power supply
- Rikom 521 C Series